3M Perfect-It: a polishing system for cars and boats

A freshly repaired paint finish that shows fine, circular streaks under strong light. A boat hull that has turned dull and chalky from sun and weather. Both call for polishing, but it matters which products and accessories you use. 3M Perfect-It is a product family developed for exactly these polishing processes, with separate ranges for automotive paint and for the resin-based gelcoat on boat hulls. But which product is for what, and how do the elements of the system work together? The guide below will help you find your way.
Summary
3M Perfect-It is 3M's polishing system, in which the polishing compound, the polishing pad and the microfibre cloth are matched to each other to deliver the final result. There are separate ranges for automotive paint and for gelcoat surfaces, such as boat hulls and motorhomes. As the official Hungarian distributor of 3M, Flanker offers more than 30 Perfect-It items from both ranges.
- System: the compound, the pad and the cloth deliver the result together, and the compounds are distinguished by a colour code.
- Ultrafina SE Polish (50383, dark blue cap): a very fine automotive polish and the last step of the colour-coded process. Used with a machine polisher, it removes holograms and swirl marks.
- Green compounding pad (50499, 75 mm): a hook-and-loop, convoluted foam pad for compounding and denibbing (removing dust particles that have dried into the paint and smoothing out the spots they leave).
- Yellow microfibre cloth (50400): wipes away polish residue, dust and fingerprints without scratching. It can also be used on glass, metal, chrome, vinyl and leather.
- Gelcoat Medium Cutting Compound + Wax (36106E): medium cut and durable wax in one product, for one-step gelcoat polishing.
- Gelcoat range: Gelcoat Heavy Cutting Compound (36102E) is for P600 and finer scratches, Gelcoat Medium Cutting Compound + Wax (36106E) for P1000 and finer, and Gelcoat Light Cutting Polish + Wax (36110E) for P1500 and finer.
What is 3M Perfect-It?
3M Perfect-It is 3M's polishing and paint finishing product family: a system of polishing compounds, polishing pads, back-up pads and microfibre cloths whose elements are used step by step. Its purpose is to remove scratches and surface defects progressively. There are separate ranges for automotive paint and for gelcoat surfaces. Gelcoat is the pigmented, resin-based outer coating of boat hulls and many motorhomes.
Our range includes more than 30 Perfect-It items, among them more than a dozen polishing pads, around a dozen polishing compounds, plus back-up pads and cloths. The back-up pad is the support plate mounted on the polishing machine, to which the hook-and-loop pad attaches.
How does the Perfect-It system differ from a standalone polishing compound?
With a standalone polishing compound, you only choose the compound, whereas in the Perfect-It system the compound, the pad and the cloth work together. The compounds are distinguished by a colour code, so you can see at a glance which one belongs to which step. The cut, in other words the abrasive action of the compound, is reduced step by step, and each step refines the marks left by the previous one.
In the automotive range, two examples of the colour code are the dark blue and the yellow caps. Ultrafina SE, with its dark blue cap, is the last step of 3M's colour-coded process, whilst Extra Fine Plus Compound (80349), with its yellow cap, is designed specifically for modern scratch-resistant clear coats (the top, transparent layer of the paint finish). The bottles of the gelcoat products are also colour-coded. The use of automotive polishing compounds is covered in more detail in our article on 3M polishing compounds.
Each compound is paired with the pad that suits the task. Compounding is the stage where a more abrasive compound is used to remove sanding marks; this calls for a compounding pad. On automotive paint, the final step aims to remove holograms. A hologram is the hazy, shimmering pattern that becomes visible under direct light after earlier, coarser polishing. For this, a finer pad is typically the right choice. Finally, the cloth completes the polishing process, allowing polish residue to be wiped away without scratching.
Which 3M Perfect-It product is for what?
Each of the four Perfect-It products below performs a different task. The green hook-and-loop pad is for compounding, Ultrafina SE Polish for removing holograms on automotive paint, the yellow microfibre cloth for wiping away polish residue without scratching, and Gelcoat Medium Cutting Compound + Wax (36106E) for one-step gelcoat polishing.
Green hook-and-loop compounding pad (50499)
3M™ Perfect-It™ Foam Compounding Pad, Green, Convoluted, 75 mm, 50499 is a foam compounding pad and part of the Perfect-It paint finishing system. The pad can be used at every step of compounding, from refining sanding scratches to low-speed polishing. Its surface has a convoluted, ridged design, and it attaches to the back-up pad with hook and loop. The pad can also be used for denibbing: the removal of tiny dust particles that have dried into the paint (the ‘nibs’) and the subsequent smoothing of the spots they leave.
Ultrafina SE Polish (50383)
3M™ Perfect-It™ Ultrafina SE Polish, 1 L, 50383, with a dark blue cap, is a very fine automotive polish. Its main task is to remove holograms and swirl marks (a web of tiny circular scratches) from repaired or original factory paint.
The polish is used with a machine polisher. Applied correctly, it delivers a high-gloss finish, and any residue can then be cleaned off quickly. In our range, the Ultrafina line also includes a fine, blue, convoluted pad (3M™ Perfect-It™ Ultrafine Polishing Pad, 50457), which is designed for removing swirl marks, even on dark car colours. The polish is also available in a 250 ml bottle with a dark blue cap.
Yellow microfibre polishing cloth (50400)
3M™ Perfect-It™ Ultra Soft Cloth, Yellow, High Performance, 50400 is made for the final phase of the job: wiping away polish residue, dust, dirt and fingerprints without scratching. Scratch-free cleaning matters because only on a clean surface can you check whether the defects have really gone. The advantages of the microfibre polishing cloth are that it is low-linting and chemical-resistant, and besides painted surfaces it can also be used on glass, metal, chrome, vinyl and leather.
Gelcoat Medium Cutting Compound + Wax (36106E)
3M™ Perfect-It™ Gelcoat Medium Cutting Compound + Wax, 946 ml, 36106E is designed for polishing gelcoat surfaces. Weathering causes gelcoat to oxidise: it loses its gloss, fades and eventually becomes chalky, in other words powdery and matt. 36106E combines medium cut and durable wax in one product, for one-step gelcoat polishing.
36106E is suitable for removing heavier defects, oxidation, fading, chalking and weathering marks, as well as scratches left by P1000 and finer sandpaper. The P-grade indicates the grit size of the sandpaper: the higher the number, the finer the paper and the finer the scratch it leaves.
It leaves a glossy, waxed layer that helps protect the surface against the effects of weather. Depending on the condition of the surface, it may even replace the separate polishing step. It can be used on both new and used boats, on motorhomes and on industrial gelcoat surfaces.
How to polish a gelcoat surface with Perfect-It products
On gelcoat, the depth of the damage is decisive. Gelcoat Heavy Cutting Compound (36102E) is for P600 and finer scratches, Gelcoat Medium Cutting Compound + Wax (36106E) for P1000 and finer, and Gelcoat Light Cutting Polish + Wax (36110E) for P1500 and finer. If the condition of the surface allows, 36106E on its own may be enough for the whole job.
The gelcoat range is matched to the P-grade of the sandpaper, so the first thing to establish is what grade of sandpaper marks need to be removed. If you are dealing with marks from P600 paper, you can start with the fastest-cutting member of the range, 3M Perfect-It Gelcoat Heavy Cutting Compound (36102E), which leaves a high-gloss surface ready for further polishing and waxing.
This can be followed by 36106E and then, as the finest step, 3M Perfect-It Gelcoat Light Cutting Polish + Wax (36110E), which deals with light to medium oxidation, swirl marks and P1500 and finer scratches, even on dark-coloured gelcoat. The range can therefore also be used as a multi-step system, but the number of steps is always determined by the actual condition of the surface, on a boat and a motorhome alike.
How to use Perfect-It products correctly
Perfect-It products are chosen to match the surface and the depth of the defect: automotive products for automotive paint, and products from the gelcoat range for gelcoat. Start with the polishing step that suits the defect, and only move to a finer one once the previous step has done its job. Finally, wipe away the polish residue with a microfibre cloth.
Before applying any compound, the surface must be clean and dry, otherwise contamination can cause new scratches during polishing. Machine handling, the direction of movement and the correct pressure are covered in detail in our article on using a polishing machine.
Make sure that the compound, the pad and the back-up pad are chosen to match one another. For the exact pairing, it is therefore worth asking our experts for advice.
3M Perfect-It from Flanker
As the official Hungarian distributor of 3M, Flanker has been selling 3M products and providing complex industry solutions for more than 20 years. Of the eight industries Flanker serves, the Perfect-It product family is closely linked to two: marine maintenance, and the automotive and vehicle industry. Our web catalogue is backed by an experienced professional partner who knows which compound, pad and cloth suit the polishing of a given surface.
Flanker's team provides expert advice to help you choose the right Perfect-It products, whether you run a body repair shop, a car detailing business or a marina service, or you are a manufacturer working with industrial gelcoat surfaces.
If you are looking for a reliable Perfect-It solution for automotive paint or a gelcoat surface, browse our web catalogue or contact our experts, who will be happy to help you find the most suitable 3M solution.
Frequently Asked Questions
Which Perfect-It polish is the final step on automotive paint?
In the automotive range, Ultrafina SE Polish (50383), with its dark blue cap, completes 3M's colour-coded process. It is used with a machine polisher to remove holograms (the hazy, shimmering marks of earlier polishing) and swirl marks from repaired or original factory paint.
Which Perfect-It gelcoat product should I choose for which scratch depth?
The P-grade of the sandpaper is the guide: a lower number means coarser paper and a deeper scratch, a higher number a finer one. Gelcoat Heavy Cutting Compound (36102E) is for P600 and finer scratches, Gelcoat Medium Cutting Compound + Wax (36106E) for P1000 and finer, and Gelcoat Light Cutting Polish + Wax (36110E) for P1500 and finer. The latter can also be used on dark-coloured gelcoat.
What is the green Perfect-It compounding pad (50499) used for?
The green pad is a 75 mm, hook-and-loop, convoluted foam compounding pad that can be used at any step of compounding. It is suitable for refining sanding scratches, for low-speed polishing and for denibbing, that is, removing dust particles (nibs) that have dried into the paint and smoothing out the spots they leave.
On which surfaces can the yellow Perfect-It microfibre cloth be used?
Besides polished paint, the yellow microfibre cloth (50400) can also be used on glass, metal, chrome, vinyl and leather. It picks up polish residue, dust, dirt and fingerprints without scratching. It is also low-linting and resistant to chemicals.
Where can I buy 3M Perfect-It products, and who can help me choose?
Flanker is the official Hungarian distributor of 3M, and more than 30 Perfect-It items are available in our web catalogue. Our experts can also help you choose the compound, pad and cloth that suit the surface and the depth of the defect. You can reach them via our contact page.
More articles




























